General
Device type
Solid State Drive - Hot-Swap
NAND flash memory type
TLC (triple-level cell)
Form factor
3.5" LFF Low Profile (8.9 cm LFF Low Profile)
Features
Digitally Signed Firmware
Combined with
HPE with low-profile carrier
Performance
Drive class
Read Intensive
Transfer rate drive
600 MBps (external)
Internal data throughput
515 MBps (read)/ 480 MBps (write)
4 KB Random Read
58500 IOPS
4 KB Random Write
29000 IOPS
Expansion and connectivity
Interfaces
1 x SATA 6 Gb/s - 7-pin Serial ATA
Compatible Switch Panel
3.5" LFF Low Profile (8.9 cm LFF Low Profile)
Power Supply
Power Consumption
1.35 watts (idle)
3.02 watts (random read)
3.02 watts (random labeling)
3.05 watts (sequential reading)
3.37 watts (sequential write)
3.02 watts (random read/write)
3.37 watts (maximum)
Manufacturer's warranty
Service and support
Limited warranty - 3 years
Compatibility Information
Designed for
HPE ProLiant DL20 Gen10 (3.5"), DL20 Gen10 Entry (3.5"), DL20 Gen10 Performance (3.5"), DL20 Gen10 Plus (3.5"), DL20 Gen10 Plus Base (3.5"), DL20 Gen10 Plus Entry (3.5"), DL20 Gen10 Plus High Performance (3.5"), DL20 Gen10 Plus Performance (3.5"), DL20 Gen10 solution (3.5"), DL325 Gen10 Plus (3.5"), DL325 Gen10 Plus All-NVMe Flash Node for Qumulo (3.5"), DL325 Gen10 Plus All-NVMe Flash Node for Software Defined Storage (3.5"), DL325 Gen10 Plus for Weka BAse Tracking (3.5"), DL325 Gen10 Plus for Weka Expansion Tracking (3.5"), DL325 Gen10 Plus V2 (3.5"), DL325 Gen10 Plus V2 Base (3.5"), DL325 Gen10 Plus V2 for Weka Base Tracking (3.5"), DL325 Gen10 Plus V2 Performance (3.5"), ML110 Gen10 (3.5"), ML110 Gen10 Entry (3.5"), ML110 Gen10 Performance (3.5"), ML110 Gen10 Solution (3.5"), ML30 Gen10 Plus (3.5"), ML30 Gen10 Plus Entry (3.5"), ML30 Gen10 Plus Performance (3.5"), ML350 Gen10 (3.5"), ML350 Gen10 Base (3.5"), ML350 Gen10 Entry (3.5"), ML350 Gen10 High Performance (3.5"), ML350 Gen10 Performance (3.5"), ML350 Gen10 SMB (3.5"), ML350 Gen10 Solution (3.5"), ML350 Gen10 Special Server (3.5"), ML350 Gen10 Sub-Entry (3.5")
HPE SimpliVity 325 Gen10 Plus V2 Node (3.5")
Product safety information
Manufacturer information:
HP Deutschland GmbH
Herrenberger Straße 140
Baden-Württemberg
Böblingen, Deutschland, 71034
firmen.kunden@hp.com
www.hp.com/de
There are no reviews yet.
German
Italian
