General
Device type
Solid State Drive - Hot-Swap
NAND flash memory type
TLC (triple-level cell)
Form factor
2.5" SFF (6.4 cm SFF)
Features
Digitally Signed Firmware
Combined with
HPE Basic Carrier
Performance
Disk drive recordings per day
3.05
Transfer rate drive
600 MBps (external)
Internal data throughput
520 MBps (read) / 480 MBps (write)
4 KB Random Read
59000 IOPS
4 KB Random Write
31000 IOPS
Expansion and connectivity
Interfaces
1 x SATA 6 Gb/s
Compatible switch panel
2.5" SFF (6.4 cm SFF)
Power
Power Consumption
1.37 watts (idle)
3.04 watts (random read)
3.04 watts (random labeling)
3.2 watts (sequential reading)
4.1 watt (sequential write)
3.04 watts (random read/write)
4.1 watt (maximum)
Manufacturer's warranty
Service and support
Limited warranty - 3 years
Compatibility Information
Designed for
HPE ProLiant DL20 Gen10 Plus (2.5"), DL20 Gen10 Plus Base (2.5"), DL20 Gen10 Plus Entry (2.5"), DL20 Gen10 Plus High Performance (2.5"), DL20 Gen10 Plus Performance (2.5"), DL325 Gen10 Plus V2 (2.5"), DL325 Gen10 Plus V2 Base (2.5"), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5"), DL325 Gen10 Plus V2 Performance (2.5"), DL345 Gen10 Plus (2.5"), DL345 Gen10 Plus Base (2.5"), DL345 Gen10 Plus Entry (2.5"), DL360 Gen10 Plus (2.5"), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5"), DL360 Gen10 Plus for Weka Base Tracking (2.5"), DL360 Gen10 Plus Network Choice (2.5"), DL365 Gen10 Plus (2.5"), DL380 Gen10 Plus (2.5"), DL380 Gen10 Plus Network Choice (2.5"), DL385 Gen10 Plus V2 (2.5"), DL385 Gen10 Plus V2 Base (2.5"), DL385 Gen10 Plus V2 Entry (2.5"), ML30 Gen10 Plus (2.5"), ML30 Gen10 Plus Entry (2.5"), ML30 Gen10 Plus Performance (2.5")
HPE SimpliVity 325 Gen10 Plus V2 Node (2.5")
Product safety information
Manufacturer information:
HP Deutschland GmbH
Herrenberger Straße 140
Baden-Württemberg
Böblingen, Deutschland, 71034
firmen.kunden@hp.com
www.hp.com/de
There are no reviews yet.
German
